Vigilante del Maule / Carlos Jarpa | Plataforma Arquitectura:
'via Blog this'
dissabte, 1 de febrer del 2014
diumenge, 19 de gener del 2014
Little Car on a table
On this post it is going to be planned a little car-robot who moved on a flat table and once it arrives to the border, it turns and go forward.
the objective is to sweep the table surface moving as per internally programed algorithm.
http://ssv.epfl.ch/files/content/sites/lben/files/users/179705/Brownian%20Motion%20Handout.pdf
http://bringerp.free.fr/Files/Captain%20Blood/Saupe87d.pdf
the objective is to sweep the table surface moving as per internally programed algorithm.
http://ssv.epfl.ch/files/content/sites/lben/files/users/179705/Brownian%20Motion%20Handout.pdf
http://bringerp.free.fr/Files/Captain%20Blood/Saupe87d.pdf
From Arduino Serial Port to be read by Matlab
Taking some data from Arduino AnalogRead but sending to serial port with two decimal after scaling from 1023 end-scale to 5V real-end-scale
so, the sketch in Arduino is:
int sensorA;
float sensorA1;
void setup()
{
Serial.begin(9600); // sets the serial port to 9600
}
void loop()
{
sensorA = analogRead(0);
sensorA1=(float)sensorA/1023*5;
Serial.println(sensorA1);
delay(20); // wait 20ms for next reading
}
the objective is getting data from Arduino for being displayed on Matlab.
For openning the Serial Port from Matlab...
s = serial('COM6');
set(s,'BaudRate',9600);
fopen(s);
out = fscanf(s);
fclose(s)
delete(s)
clear s
the problems:
1) if MATLAB is run before Arduino connection, then Arduino found COM6 busy and it is not able to be connected
2) if Arduino get the COM6, the MATLAB find it busy and it is not able to connect and getting data from COM6
??? Error using ==> fopen
Port: COM6 is not available. Available ports: COM7.
Use INSTRFIND to determine if other instrument objects are connected to the requested device.
>>
seems the project is blocked at this time.
MATLAB runs an old version 6.5.0, but I think no later version is required for this single application
Next solution steps to be checked:
http://www.mathworks.co.uk/matlabcentral/fileexchange/32374-matlab-support-package-for-arduino-aka-arduinoio-package
getting data from Excel
http://www.mrexcel.com/forum/excel-questions/488335-receive-data-com-port.html
from Excel 2007
http://strokescribe.com/en/read-serial-port-excel-2007.html
http://robottini.altervista.org/arduino-and-real-time-charts-in-excel
so, the sketch in Arduino is:
int sensorA;
float sensorA1;
void setup()
{
Serial.begin(9600); // sets the serial port to 9600
}
void loop()
{
sensorA = analogRead(0);
sensorA1=(float)sensorA/1023*5;
Serial.println(sensorA1);
delay(20); // wait 20ms for next reading
}
the objective is getting data from Arduino for being displayed on Matlab.
For openning the Serial Port from Matlab...
s = serial('COM6');
set(s,'BaudRate',9600);
fopen(s);
out = fscanf(s);
fclose(s)
delete(s)
clear s
the problems:
1) if MATLAB is run before Arduino connection, then Arduino found COM6 busy and it is not able to be connected
2) if Arduino get the COM6, the MATLAB find it busy and it is not able to connect and getting data from COM6
??? Error using ==> fopen
Port: COM6 is not available. Available ports: COM7.
Use INSTRFIND to determine if other instrument objects are connected to the requested device.
>>
seems the project is blocked at this time.
MATLAB runs an old version 6.5.0, but I think no later version is required for this single application
Next solution steps to be checked:
http://www.mathworks.co.uk/matlabcentral/fileexchange/32374-matlab-support-package-for-arduino-aka-arduinoio-package
getting data from Excel
http://www.mrexcel.com/forum/excel-questions/488335-receive-data-com-port.html
from Excel 2007
http://strokescribe.com/en/read-serial-port-excel-2007.html
http://robottini.altervista.org/arduino-and-real-time-charts-in-excel
divendres, 28 de setembre del 2012
divendres, 21 de setembre del 2012
dissabte, 2 de juny del 2012
Aerogeneradores Top10
1) Whale Power
- Whale Power http://www.enviranorth.com/
- Quiet Revolution qr5
- Windspire
- Mageen Air Rotor System (Mars)
- Light Wind
- Honeywell Wind Turbine
- WePOWER
- Spiral Drag Wind Turbine
- Architectural Wind
- Sky Serpent
Subscriure's a:
Missatges (Atom)